feat: add fixwikihub codex pool profile

config/platform-infra/sub2api-codex-pool.yaml

@@ -24,6 +24,11 @@ profiles:
       accountName: unidesk-codex-pinche
       configFile: config.toml.pinche
       authFile: auth.json.pinche
+    - profile: fixwikihub
+      accountName: unidesk-codex-fixwikihub
+      configFile: config.toml.fixwikihub
+      authFile: auth.json.fixwikihub
+      openaiResponsesWebSocketsV2Mode: ctx_pool
 publicExposure:
   enabled: true
   proxyName: platform-infra-sub2api

docs/reference/cli.md

@@ -68,7 +68,7 @@ CI/CD、GitOps、rollout、artifact 发布、PR 合并后的 runtime lane 滚动
 - `hwlab g14 git-mirror status|apply|sync|flush [--dry-run|--confirm]` 是 `devops-infra` git mirror/relay 的受控维护入口：`apply` 渲染并 server-side apply `devops-infra/git-mirror.yaml`，同时删除遗留 `git-mirror-hwlab-sync` CronJob；`sync` 创建一次性 manual Job，把 GitHub allowlist refs 拉入本地 mirror；`flush` 创建一次性 manual Job，把本地 `v0.2-gitops` 快进推回 GitHub。
   `status` 返回 read/write URL、last sync/write/flush、本地 ref、GitHub staging ref 和 pending flush 状态，并在 `cache.summary` 给出 `localV02`、`localGitops`、`githubGitops`、`pendingFlush`、`flushNeeded`、`githubInSync` 和下一条受控 `flushCommand`。confirmed `sync` 和 `flush` 默认创建 `.state/jobs/` 异步 job 并立刻返回可查询状态，只有现场同步调试才显式加 `--wait`；mirror 不设置 CronJob。
   如果 PipelineRun 的 `gitops-promote` 阶段报 git mirror 控制面漂移或 refs 不一致，先执行 `hwlab g14 git-mirror apply --confirm` 重新应用当前 `devops-infra/git-mirror.yaml` hook/ConfigMap，再执行 `hwlab g14 git-mirror sync --confirm --wait` 复核 refs；失败的同名 PipelineRun 只能通过 `hwlab g14 control-plane cleanup-runs --lane <lane> --pipeline-run <name> --confirm` 受控清理后重试，不要用原生 `kubectl delete` 或手工改 mirror hook。修复后仍必须用 `control-plane status --pipeline-run <name>` 和 `git-mirror status` 分别确认 runtime closeout 与 GitHub flush。
-- `platform-infra sub2api plan|apply|status|validate|codex-pool` 是 G14 `platform-infra` namespace 内 Sub2API 的受控入口。镜像版本由 `config/platform-infra/sub2api.yaml` 控制，Codex 上游池、统一 API key Secret、FRP 公网端口和 master `~/.codex` 消费端由 `config/platform-infra/sub2api-codex-pool.yaml` 控制；`codex-pool sync --confirm` 从 YAML 指定的 `~/.codex/config.toml*`/`auth.json*` 导入四个上游账号到同一 Sub2API group，统一消费 key 固定存放在 `platform-infra/sub2api-codex-pool-api-key.API_KEY`。`codex-pool expose --confirm` 只新增明确 FRPS allow port 和 `platform-infra/sub2api-frpc`，不得扩大端口段；`codex-pool configure-local --confirm` 先把当前 `~/.codex/config.toml`、`auth.json` 备份成 `*.pre-sub2api`，再把默认 provider 指向 master 本机 FRP 入口。所有输出只允许打印 key preview/fingerprint、字节数和 Secret 路径，不打印完整 API key。
+- `platform-infra sub2api plan|apply|status|validate|codex-pool` 是 G14 `platform-infra` namespace 内 Sub2API 的受控入口。镜像版本由 `config/platform-infra/sub2api.yaml` 控制，Codex 上游池、统一 API key Secret、FRP 公网端口和 master `~/.codex` 消费端由 `config/platform-infra/sub2api-codex-pool.yaml` 控制；`codex-pool sync --confirm` 从 YAML 指定的 `~/.codex/config.toml*`/`auth.json*` 导入 YAML 声明的上游账号到同一 Sub2API group，统一消费 key 固定存放在 `platform-infra/sub2api-codex-pool-api-key.API_KEY`。`profiles.entries[].openaiResponsesWebSocketsV2Mode` 用于对接需要 Responses WebSocket v2 的 OpenAI-compatible 上游，新增或调整上游优先改 YAML 后 `codex-pool sync --confirm`，不改代码、不走 CI/CD。`codex-pool expose --confirm` 只新增明确 FRPS allow port 和 `platform-infra/sub2api-frpc`，不得扩大端口段；`codex-pool configure-local --confirm` 先把当前 `~/.codex/config.toml`、`auth.json` 备份成 `*.pre-sub2api`，再把默认 provider 指向 master 本机 FRP 入口。`validate`/`codex-pool validate` 是按需验收，不是连续可用性探针；完整 namespace 边界、路由和探针口径见 `docs/reference/platform-infra.md`。所有输出只允许打印 key preview/fingerprint、字节数和 Secret 路径，不打印完整 API key。
 - `hwlab g14 observability status|apply|query|targets|boundary|closeout [--lane v02] [--promql <expr>] [--expect-count N] [--expect-value V] [--dry-run|--confirm]` 是 G14 `devops-infra` 共享监控基础设施和 HWLAB v0.2 监控 closeout 的受控入口。`apply` 固定安装 Prometheus Operator `v0.91.0`、Prometheus `v3.12.0`、Prometheus 发现 RBAC、`devops-infra` 内 Prometheus 实例和 ClusterIP query Service，并给被允许发现的 workload namespace 打低风险 label；它不把 Prometheus、Grafana 或 Alertmanager 部署到 `hwlab-v02`，也不接管 HWLAB runtime Deployment/Service。`status` 只读汇总 CRD、operator Deployment、Prometheus CR/pod/service、`hwlab-v02` ServiceMonitor/PrometheusRule 和 bounded `up` 查询；`query` 只通过 Kubernetes service proxy 查询 Prometheus，支持 `--expect-count` / `--expect-value` 输出 `assertion`、bad values 和 missing/extra series；`targets` 汇总 ServiceMonitor/PrometheusRule、metrics sidecar readiness/restart、三层指标值和 `metrics.k8s.io` 当前 CPU/内存资源快照；`boundary` 验证 workload namespace 没有 Prometheus/Alertmanager，并对 `19666/19667` 公网 `/metrics` 做负向验证；`closeout` 聚合平台 ready、scrape reachable、sidecar serving、business health probe、resource snapshot、namespace boundary 和 public metrics exposure 语义结论。长期边界见 `docs/reference/g14-observability-infra.md`。
 - `hwlab g14 tools-image status|build --name ci-node-tools --tag <tag> [--dockerfile deploy/ci/hwlab-ci-node-tools.Dockerfile] [--dry-run|--confirm]` 是 G14 固定 HWLAB CI tools image 的受控 host build/push 入口；构建和 push 只发生在 G14 host 与本地 registry，不在 master server 构建，也不把 `apk add`/runtime install 塞进 Tekton PipelineRun。
 - `trans gh:/owner/repo ...` 把 GitHub issue/PR 映射成只读/受控写入的虚拟文本目录，适合日报、PR 正文和 issue 正文的小补丁维护：`trans gh:/pikasTech/HWLAB ls` 展示 `pr/` 与 `issue/`，`trans gh:/pikasTech/HWLAB/pr ls [--limit N] [--full]` 和 `trans gh:/pikasTech/HWLAB/issue ls [--limit N] [--full]` 展示条目状态、楼层数、正文长度和标题，`trans gh:/pikasTech/HWLAB/pr/507 ls` 展示单个 PR 的一楼正文文件，`trans gh:/pikasTech/HWLAB/505/1 cat|rg|patch-apply` 兼容旧式 issue/PR number route。`patch-apply` 使用 UniDesk 默认 apply-patch v2 的虚拟文件 executor，把正文一楼映射为 `body.md`，写回仍走 `bun scripts/cli.ts gh issue/pr update` 的 guard/concurrency 规则；`rm` 对正文一楼结构化拒绝，避免误删 issue/PR 正文。大正文读取必须展开 UniDesk gh dump 文件，否则 `cat/rg/patch-apply` 会误读为空，这是 `gh:` 虚拟文件接口的 P0 可见性契约。

docs/reference/platform-infra.md

@@ -25,6 +25,7 @@
 - `pool.groupName` names the Sub2API group that represents the pool.
 - `pool.apiKeySecretName` and `pool.apiKeySecretKey` name the k3s Secret that stores the single consumer API key.
 - `profiles.entries` selects local Codex profile files from `~/.codex/` and maps them to Sub2API account names.
+- `profiles.entries[].openaiResponsesWebSocketsV2Mode` is the account-level Responses WebSocket v2 switch for OpenAI-compatible upstreams that require WebSocket transport. Allowed values are `off`, `ctx_pool`, and `passthrough`; omit the field unless that upstream needs it.
 - `publicExposure` controls the optional FRP bridge from master server to the G14 ClusterIP service.
 - `localCodex` controls how the master server's current `~/.codex` consumer files are backed up and rewritten.
 
@@ -36,8 +37,16 @@ The request path is:
 4. Sub2API validates the unified key and resolves its `group_id`.
 5. Accounts listed in `profiles.entries` are bound to the same group via `group_ids`, so Sub2API dispatches through that group using its own account selection semantics.
 
+Adding an upstream should be a fast YAML operation: create the corresponding local `~/.codex/config.toml.<profile>` and `auth.json.<profile>` inputs, add one `profiles.entries` item, then run `platform-infra sub2api codex-pool plan|sync --confirm`. Do not add code or CI/CD for ordinary pool membership changes. Code changes are only appropriate when the YAML schema needs a new reusable capability such as account-level WebSocket mode.
+
 After `codex-pool configure-local --confirm`, the default upstream profile must not recursively import the just-created Sub2API consumer endpoint as an upstream account. Keep the default source profile pointed at `config.toml.<backupSuffix>` and `auth.json.<backupSuffix>`; fallback to the current default files is only for first bootstrap before backups exist.
 
+## Public FRP Boundary
+
+When `publicExposure.enabled` is true, the same FRP TCP bridge exposes both OpenAI-compatible API paths and the built-in Sub2API management frontend. The management UI is reachable at the configured `publicExposure.publicBaseUrl` and its `/login` route; do not allocate a second public port unless a separate YAML-controlled exposure decision exists.
+
+The public management UI is an operations endpoint. Keep Sub2API itself in `platform-infra`, keep the Kubernetes Service as ClusterIP, and treat FRP as the only public bridge unless a later decision explicitly changes the exposure model.
+
 ## Availability And Probes
 
 Kubernetes readiness is not the same as pool availability:

scripts/src/platform-infra-sub2api-codex.ts

@@ -44,11 +44,14 @@ interface CodexProfile {
   envKey: string | null;
   apiKey: string | null;
   apiKeySource: "auth-json" | "env" | null;
+  openaiResponsesWebSocketsV2Mode: OpenAIResponsesWebSocketsV2Mode | null;
   authOpenAIKeyShape: string;
   ok: boolean;
   error: string | null;
 }
 
+type OpenAIResponsesWebSocketsV2Mode = "off" | "ctx_pool" | "passthrough";
+
 interface CodexPoolConfig {
   groupName: string;
   apiKeyName: string;
@@ -67,6 +70,7 @@ interface CodexPoolProfileConfig {
   authFile: string;
   fallbackConfigFile: string | null;
   fallbackAuthFile: string | null;
+  openaiResponsesWebSocketsV2Mode: OpenAIResponsesWebSocketsV2Mode | null;
 }
 
 interface CodexPoolPublicExposureConfig {
@@ -232,6 +236,7 @@ async function codexPoolSync(config: UniDeskConfig, options: SyncOptions): Promi
       apiKey: profile.apiKey,
       apiKeySource: profile.apiKeySource,
       apiKeyFingerprint: fingerprint(profile.apiKey ?? ""),
+      openaiResponsesWebSocketsV2Mode: profile.openaiResponsesWebSocketsV2Mode,
     })),
   };
   const result = await capture(config, g14K3sRoute, ["script"], syncScript(payload, pool));
@@ -412,6 +417,7 @@ function collectCodexProfiles(): CodexProfile[] {
       envKey: null,
       apiKey: null,
       apiKeySource: null,
+      openaiResponsesWebSocketsV2Mode: entry.openaiResponsesWebSocketsV2Mode,
       authOpenAIKeyShape: existsSync(authPath) ? "unknown" : "missing",
       ok: false,
       error: null,
@@ -474,6 +480,7 @@ function discoverCodexProfileConfigs(codexDir: string): CodexPoolProfileConfig[]
         authFile: suffix === "" ? "auth.json" : `auth.json.${suffix}`,
         fallbackConfigFile: null,
         fallbackAuthFile: null,
+        openaiResponsesWebSocketsV2Mode: null,
       };
     });
 }
@@ -568,6 +575,7 @@ function readProfileConfig(value: unknown, defaults: CodexPoolProfileConfig[]):
     const fallbackAuthFile = stringValue(entry.fallbackAuthFile);
     if (fallbackConfigFile !== null) validateCodexFileName(fallbackConfigFile, `profiles.entries[${index}].fallbackConfigFile`);
     if (fallbackAuthFile !== null) validateCodexFileName(fallbackAuthFile, `profiles.entries[${index}].fallbackAuthFile`);
+    const openaiResponsesWebSocketsV2Mode = readOpenAIResponsesWebSocketsV2Mode(entry.openaiResponsesWebSocketsV2Mode, `profiles.entries[${index}].openaiResponsesWebSocketsV2Mode`);
     return {
       profile,
       accountName,
@@ -575,10 +583,19 @@ function readProfileConfig(value: unknown, defaults: CodexPoolProfileConfig[]):
       authFile,
       fallbackConfigFile,
       fallbackAuthFile,
+      openaiResponsesWebSocketsV2Mode,
     };
   });
 }
 
+function readOpenAIResponsesWebSocketsV2Mode(value: unknown, key: string): OpenAIResponsesWebSocketsV2Mode | null {
+  if (value === undefined || value === null) return null;
+  const text = stringValue(value);
+  if (text === null) throw new Error(`${codexPoolConfigPath}.${key} must be a string`);
+  if (text === "off" || text === "ctx_pool" || text === "passthrough") return text;
+  throw new Error(`${codexPoolConfigPath}.${key} must be one of off, ctx_pool, passthrough`);
+}
+
 function readPublicExposureConfig(value: unknown, defaults: CodexPoolPublicExposureConfig): CodexPoolPublicExposureConfig {
   if (!isRecord(value)) return defaults;
   const masterFrpsValue = isRecord(value.masterFrps) ? value.masterFrps : {};
@@ -678,6 +695,7 @@ function redactProfile(profile: CodexProfile): Record<string, unknown> {
     model: profile.model,
     envKey: profile.envKey,
     apiKeySource: profile.apiKeySource,
+    openaiResponsesWebSocketsV2Mode: profile.openaiResponsesWebSocketsV2Mode,
     apiKeyPresent: profile.apiKey !== null && profile.apiKey.length > 0,
     apiKeyBytes: profile.apiKey === null ? 0 : Buffer.byteLength(profile.apiKey, "utf8"),
     apiKeyFingerprint: profile.apiKey === null ? null : fingerprint(profile.apiKey),
@@ -1423,6 +1441,15 @@ def list_accounts(token):
     return extract_items(data)
 
 def account_payload(profile, group_id):
+    extra = {
+        "openai_responses_mode": "force_responses",
+        "unidesk_codex_profile": profile["profile"],
+        "unidesk_managed": True,
+    }
+    ws_mode = profile.get("openaiResponsesWebSocketsV2Mode")
+    if ws_mode:
+        extra["openai_apikey_responses_websockets_v2_mode"] = ws_mode
+        extra["openai_apikey_responses_websockets_v2_enabled"] = ws_mode != "off"
     return {
         "name": profile["accountName"],
         "notes": f"UniDesk-managed Codex profile {profile['profile']} from {profile['configFile']} and {profile['authFile']}; secret source={profile['apiKeySource']}; fingerprint={profile['apiKeyFingerprint']}.",
@@ -1432,11 +1459,7 @@ def account_payload(profile, group_id):
             "api_key": profile["apiKey"],
             "base_url": profile["baseUrl"],
         },
-        "extra": {
-            "openai_responses_mode": "force_responses",
-            "unidesk_codex_profile": profile["profile"],
-            "unidesk_managed": True,
-        },
+        "extra": extra,
         "concurrency": 1,
         "priority": 1,
         "rate_multiplier": 1,
@@ -1469,6 +1492,7 @@ def ensure_accounts(token, profiles, group_id):
             "baseUrl": profile["baseUrl"],
             "apiKeySource": profile["apiKeySource"],
             "apiKeyFingerprint": profile["apiKeyFingerprint"],
+            "openaiResponsesWebSocketsV2Mode": profile.get("openaiResponsesWebSocketsV2Mode"),
             "valuesPrinted": False,
         })
     return results