fix: complete 71freq boardcomm ioprobe spec (#987)

Co-authored-by: Codex <codex@noreply.local>

config/hwlab-hwpod-preinstalls/constart-71freq-c.yaml

@@ -49,11 +49,28 @@ hwpodPreinstall:
       - id: hwpod-node-ops
         kind: hwpod-node-ops
         endpointRef: config/hwlab-gateway/constart-71freq-d601-v03.yaml#gateway.profile.nodeOps.publicUrl
+      - id: freq71
+        kind: jsonrpc-tcp
+        host: 192.168.0.154
+        port: 8000
+        role: frequency-controller
+      - id: main41
+        kind: jsonrpc-tcp
+        host: 192.168.0.151
+        port: 8000
+        role: main-controller
   ioProbe:
     uart:
       id: uart/1
       port: COM4
       baudrate: 921600
+    probes:
+      - id: main41.ai0.current
+        endpointRef: main41
+        quantity: current
+        unit: mA
+        path: hardware/ai/0
+        valuePath: ai_current_mA
   runtimeMount:
     namespace: hwlab-v03
     configMapName: hwlab-v03-hwpod-preinstalled-specs
@@ -92,11 +109,33 @@ hwpodPreinstall:
         probeName: MicroLink CMSIS-DAP
         programBackend: keil-headless
         autoBindUvoptx: true
+      boardComm:
+        endpoints:
+          hwpod-node-ops:
+            kind: hwpod-node-ops
+            endpointRef: config/hwlab-gateway/constart-71freq-d601-v03.yaml#gateway.profile.nodeOps.publicUrl
+          freq71:
+            kind: jsonrpc-tcp
+            host: 192.168.0.154
+            port: 8000
+            role: frequency-controller
+          main41:
+            kind: jsonrpc-tcp
+            host: 192.168.0.151
+            port: 8000
+            role: main-controller
       ioProbe:
         uart:
           id: uart/1
           port: COM4
           baudrate: 921600
+        probes:
+          main41.ai0.current:
+            endpointRef: main41
+            quantity: current
+            unit: mA
+            path: hardware/ai/0
+            valuePath: ai_current_mA
       nodeBinding:
         nodeId: node-d601-f103-v2
         nodeType: pc-host

project-management/PJ2026-01/specs/PJ2026-01010305-71freq-hwpod-v03-preinstall.md

@@ -212,7 +212,7 @@ CaseRun smoke 只要求证明 71-FREQ 最小硬件链路能通过 HWPOD 服务 r
 
 71-FREQ 预装配置必须由 UniDesk YAML 承载，并通过 configRef 串联 node/lane、HWPOD spec、metadata、project-management source、gateway profile、public/API origin 和 Secret sourceRef。代码只负责解析、校验和渲染，不得内置 `D601`、`v03`、`constart-71freq-c`、`F:\Work\ConStart`、Keil 路径、COM 口、probe UID、board-comm IP、ioProbe id、旧 cloud URL 或 gateway/session id 作为 fallback。
 
-HWPOD preinstall owning YAML 至少应声明 hwpodId、sourceRef、metadataRef、targetDevice、nodeBinding、workspaceRootRef、projectRoot、toolchain、debugProbe、uart、boardComm endpoints、ioProbe、ConfigMap 名称、mount path、environment key 和 rollout target。MDTODO source owning YAML 至少应声明 sourceId、sourceKind、projectId、hwpodId、nodeId、workspaceRootRef、mdtodoRootRef、focus files 和 hwpod node ops URL configRef。Gateway profile owning YAML 至少应声明 cloudUrl、gatewayId、sessionId、resourceId、capabilityId、secretRefs 和托管运行方式。
+HWPOD preinstall owning YAML 至少应声明 hwpodId、sourceRef、metadataRef、targetDevice、nodeBinding、workspaceRootRef、projectRoot、toolchain、debugProbe、uart、boardComm endpoints、ioProbe、ConfigMap 名称、mount path、environment key 和 rollout target。71-FREQ 的 boardComm endpoints 必须显式包含 `freq71` 和 `main41`，ioProbe 必须显式包含 `main41.ai0.current`，这些字段必须进入最终挂载给 cloud-api 的 `specDocument`，不能只停留在运维 YAML 的旁路摘要字段。MDTODO source owning YAML 至少应声明 sourceId、sourceKind、projectId、hwpodId、nodeId、workspaceRootRef、mdtodoRootRef、focus files 和 hwpod node ops URL configRef。Gateway profile owning YAML 至少应声明 cloudUrl、gatewayId、sessionId、resourceId、capabilityId、secretRefs 和托管运行方式。
 
 ### 6.2 HWPOD-PRE-REQ-002 Runtime discovery 与 HWPOD工具验证
 
@@ -220,7 +220,7 @@ HWPOD preinstall owning YAML 至少应声明 hwpodId、sourceRef、metadataRef
 | --- | --- | --- | --- |
 | HWPOD-PRE-REQ-002 | 运行发现 | PJ2026-0101030502 运行发现 | [HWPOD服务](PJ2026-010103-hwpod-service.md)、[HWPOD工具](PJ2026-010102-hwpod-tools.md)、[公开入口](PJ2026-010604-public-entry.md) |
 
-HWLAB v0.3 cloud-api 必须从 runtime 挂载的 preinstalled HWPOD spec registry 发现 `constart-71freq-c`，并通过 `/v1/hwpod/specs`、`hwpod-ctl spec validate --hwpod-id constart-71freq-c` 和 `hwpod-ctl inspect` 等入口返回可审计摘要。
+HWLAB v0.3 cloud-api 必须从 runtime 挂载的 preinstalled HWPOD spec registry 发现 `constart-71freq-c`，并通过 `/v1/hwpod/specs`、`hwpod-ctl spec validate --hwpod-id constart-71freq-c` 和 `hwpod inspect --hwpod-id constart-71freq-c --dry-run` 等入口返回可审计摘要。该摘要必须能证明 ConStart root、projectRoot、Keil project、debug probe UID、`freq71`、`main41` 和 `main41.ai0.current` 均来自 YAML-first spec authority。
 
 cloud-api Pod manifest 必须包含只读 mount `/etc/hwlab/hwpod-specs` 或 YAML 声明的等价 mount，并设置 `HWLAB_HWPOD_SPEC_REGISTRY_DIRS` 指向该目录。spec discovery 可以继续支持 workspace-local `.hwlab/hwpod-spec.yaml` 和 registry dirs，但 D601/v03 71-FREQ 的 completion authority 必须是运行面挂载的 YAML preinstall，不是镜像内文件、旧 `.device-pod` profile 或旧 direct cloud URL。